Vaxis Storm 1000s
Transmitter: 1 x BNC (3G-SDI) Input
Transmitter: 1 x BNC (3G-SDI) Loop Output
Transmitter: 1 x HDMI Type A Input
Receiver: 2 x BNC (3G-SDI) Output

Wireless Range: 1148.3' / 350 m (Line-of-Sight)
# of Channels: 20
Frequency Range: 5.1 to 5.9 GHz
Latency: < 1 ms
Wi-Fi: None

Video Format:
SDI
1080p: 60/59.94/50/24/23.98
Timecode: Yes
DC Input Power: 7 to 36 VDC
Battery Type: Receiver: 1 x V-Mount


Sony 17" LMD-A170 Video Monitor
Display
Panel Type: IPS-Type LCD
Display Size: 16.61" / 42.2 cm
Aspect Ratio: 16:9
Pixels Per Inch (ppi): 133 ppi
Image Controls:
Color Temperature Selection
Focus Peaking
Screen Markers
Waveform

I/O
Video:
2 x BNC (3G-SDI) Output
1 x BNC (Composite) Output
2 x BNC (3G-SDI) Input
1 x HDMI Type A Input
1 x BNC (Composite) Input

Sporting both 3G-SDI and HDMI connections, the Storm 1000S Wireless Kit from Vaxis enables transmitting visually lossless video signals to the Vaxis receiver with less than 1 ms latency. The transmitter sends a powerful line-of-sight signal up to 1148' and offers 20 channels through the 20 and 40 MHz bands, allowing you to find a clean channel to use. This also allows you to work with multiple pairs of Vaxis Storm transmitters and receivers without interfering with each other's signals.

The Sony LMD-A170 17" LCD Production Monitor is a portable, 1920 x 1080 resolution monitor for on set, studio, and broadcast use. The monitor features an IPS LCD display with wide 178° horizontal and vertical viewing angles, and it provides 3G/HD/SD-SDI, HDMI, and composite inputs that support NTSC/PAL, 720p, 1080i, and 1080p input signals with frame rates from 24p to 60p.

The unique Picture & Picture function of the LMD-A170 allows simultaneous display of two input signals on the monitor’s screen. This function helps with colour adjustment and setting of camera frames. Various modes are available: side by side, wipe, blending, difference and auto input switching. This function works when synchronous SDI signals are input.
Sync-free side by side with low latency allows you to monitor two signals without synchronisation. You can configure each picture as HD or SD with different frame rates, taking them from both SDI and HDMI. This function works with the false colour function, camera focus function and metadata on the main picture of the two pictures.